For
Sale.
The following items will be
offered for sale in the forthcoming Club Auction (August 12 at The Cove
Tennic Club):
1. Dragon
Lady – Airframe, engine & servos. Ready
to fly except radio. This is definitely a Belrose Frequent Flyer, and has
been seen and admired by many over the years.
Airframe is about 10 years
old, engine & servos 2 years.
Power by ASP 91 - Price
guide
$350
2. ME109
– Airframe, engine & servos. Ready to fly except radio. Built
from a Midwest kit, span 54 inches, engine is a new OS FS52. Run
time about 3 hours. Excellent condition – delivery mileage only!
Price guide
$350
3. Lumina
2 channel glider, Airframe only, flown about 10 times. Price guide
$50
4. Fairchild
PT 19 Plan Pack, span 69", purchased from
Airborne Magazine. This is what they call a “Short Kit” comprising laser
cut ribs & formers, fibreglass cowl, a few more hard to make bits +
full size plan. A Bill of Materials is included for the strip and sheet
balsa you need to buy to complete the model. Price Guide
$100
5. Twister
by Black Horse Models, airframe & engine.
Powered by an Irvine
36 – runs like a Swiss Watch. Flown at Belrose for about 12 months, retired
earlier this year. Price guide
$150
This is all good stuff, but
sadly has to go to make way for new projects. Anyone wishing to negotiate
prior to the night please contact
Tony
Martin on 9913 2769 any evening, or email tonymart@hotmail.com |
 FOR
SALE
Twister 3D
With all electonics and
servos, a JR transmitter and 2 LiPo batteries. Never flown.
New price was over $600.
This
price is $400
Reason for sale? Lack of
aptitude limits altitude. Please take these away and spare my blushes.
Contact
Graham Nicholson 02 9411 2140 or grahamwn@ozemail.com.au
06/08
|
FOR
SALE
Hirobo
Sceadu 50 (HDE)
with some metal upgrade parts (3rd
bearing support, mixing arm etc), OS 50 Engine, one piece muffler, Header
Tank, Fuel Filter, 600mm fiber blade,
Futaba servo S9204, S9001x2, S3001,
2700mah Nicd, Battery monitor, some
spare parts (seesaw, stabilizer control arm, wash-out control arm, Fan
etc),
one way hirobo start shaft, start motor
and 12v Nica battery, Glow plug with battery, Fuel pump, and some fuel,
Manuals
$450.00
Contact
David Hou on 0417205533
or
davidhou@exemail.com.au
04/08
|
|
 FOR
SALE
Twister CP
with all elecronics and
servos, transmitter and 3 LiPo batteries. Never flown.
Cost about $250.
Sale
price $175.
Reason for sale? Lack of
aptitude limits altitude. Please take these away and spare my blushes.
Contact
Graham Nicholson 02 9411 2140 or grahamwn@ozemail.com.au
06/08
|
 FOR
SALE
CAP 232
1400mm (55") suit .40 -
.46c.engine. Good Condition, 6 flights only, flies like a trainer.
Just add radio gear & motor. Airframe only
$100
or with aileron servos
$150.
Contact
Doug Radford on 9450 0728(h) or 0418 653 358 or radfordd@optusnet.com.au
06/08
|
FOR
SALE
1. Weston
UK Groove
1600mm pattern ship) fitted
with the west 50 T1 engine and genesis tuned pipe supplied by the manufacturer,
also has the carbon U/C upgrade. Assembled but not flown or run (see
it at http://www.westonuk.co.uk)
2. Brio
10
with e-flight electric setup
as per modelflite recommendations, this is fitted with a Spektrum DX7 and
the transmitter, charger etc can all go with it. The Brio has been flown
a couple of times but is in good shape,
never crashed!
3. Saito
220i
(looks like a V twin but
is really an off set in line twin)
this has done a few hours
in a Pitts model 12 but I had to leave that in UK.
$700
for
the Groove, Brio and radio
or $1K
for the lot,
there are also a number
of servos, Futaba 3158, and Spektrum DS821 available
Contact
John O'Connor on 0409 457486 or john.oconnor@hetsoftware.co.uk
06/08
|
|
